PS - Powder Strip Quick Cut 3 - Non-Methylene Chloride Powder Coating Stripper

Quick Cut 3 - Non-Methylene Chloride Powder Coating Stripper

Quick Cut 3 is a non-methylene chloride, alcohol based powder coating stripper.  This is the fastest acting non-methylene chloride powder coating stripper on the market.  This immersion stripper uses an acid activator to quickly remove coatings.  Quick Cut 3 is a great alternative when methylene chloride based strippers cannot be used or are not desired.

• Fastest acting non-methylene chloride, alcohol based stripper on the market
• Great alternative to sandblasting & burn off ovens

SHIPS DIRECTLY FROM MANUFACTURER [Powder Strip]

Product Description:

Quick Cut 3 Is Our Fastest Non-Methylene Chloride Powder Coating Stripper. This Alcohol Based Immersion Stripper Uses An Acid Activator To Quickly Remove Powder Coatings. A Strong Substitute When Methylene Chloride Strippers Cannot Be Used Or Are Not Desired. It is not for use on Magnesium.

Properties:

• State: Liquid                           
• Appearance: Translucent
• Color: Clear                             
• Odor: Characteristic penetrating acid cherry
• Viscosity: Moderately Thin     
• Weight: 9.1 lbs./gal
• Boiling Point: 214°F               
• Solubility in Water: 30%
• Evaporation Rate: (ether=1) 500 (Approx.)       
• pH: Acidic
• Flammability: Combustible

Storage:

When not in use, store unused and used stripper locked in a well-ventilated and cool place. Keep the stripper in an airtight poly or stainless steel container to prevent evaporation and as a safety precaution. Avoid all possible sources of ignition and keep away from oxidizers.

Product Usage:

• Quick Cut 3 is formulated for an immersion or dip application.
• Always use product at room temperature. Stripping times may vary from project-to-project depending on the type and thickness of coating along with other environmental factors. While agitation is not required, it may accelerate stripping (air agitation is not recommended). After stripping, project should be rinsed with water to neutralize chemical.
• Dispose in accordance with all local, state and federal regulations.

Recommendations:

1.  At times it is necessary to strain excess powder from the chemical. This improves the effectiveness of the chemical and lengthens its life expectancy.
2. Room temperature is defined as 50°–85°F;however optimal usage is between 60°and 75°F.Do not heat the stripper as it does not improve performance and only increases the rate of evaporation.
3. While Quick Cut 3 can be used on all types of metal (and silicon), softer metals such as aluminum should not remain in the stripper for excessive amounts of times as this may cause pitting and etching of the surface.

_________________________________________________________________________________________________________________________________

Mission Statement

With A Client-Oriented Vision That Focuses On Being Our Client’s Biggest Asset, We At Powder Strip Continually Strive To Produce And Improve The World’s Best Powder Coating Removal Products, To Market Them Competitively And To Provide Unsurpassed Customer Service, All While Treating Everyone Honestly, Consistently, And With Integrity And Respect.

It’s Not Just A Statement At Powder Strip, It’s Our Way Of Doing Business; It’s The Right Way To Do Business!